Clean Tiles Properly

Clean Tiles Properly

Cleaning the house, the bathroom is one of the rooms that require the most attention. But do you also take the time to clean the tiles? The answer is probably no. Bathroom tiles, in addition to dirt, accumulate traces of lime, soap, or mold, so cleaning them can be a bit complicated if you want 10 results and the bathroom walls are shiny. We offer you several home remedies to clean the bathroom tiles so that, even the joints, are impeccable. If you don’t have time or know how to do it, we can do it for you!

That’s why we teach you how to clean tiles properly.

The official guide on how to clean grout and tile floors | CNN Underscored

How to remove dirt and clean tiles with vinegar

How to Clean Your Shower Tiles | HomeServe USA

White vinegar is a great all-purpose cleaner for many surfaces, including bathroom tiles! You will need a cloth, cleaning vinegar, a scouring pad, and dry cloth.

How to do it step by step

Wet the cloth in water, wring it out and pour a good splash of vinegar on it.

Step 2. Scrub all the tiles. If there are stubborn stains, use a scouring pad for those areas.

Step 3. If there are hard-to-reach areas, use a toothbrush or bristle brush to get into all the nooks and crannies.

Step 3. Rinse the tiles with the shower head. In the areas where you can not pour water in this way, use the cloth that you have used previously and well rinsed. The objective is to remove all the remains of vinegar that can remain on the surface.

Step 4. With a dry cloth, dry the whole surface. Use as many dry clothes as necessary.


Cleaning bathroom tiles with baking soda

How to clean bathroom tiles and floor | Get Set Clean

Baking soda is another one of those basic natural products in household cleaning. It is a natural deodorizer, besides being environmentally friendly, economical, odorless, and very, very effective. To use it to clean the bathroom tiles, you need baking soda, liquid soap, hydrogen peroxide, and a spray dispenser.

To do it follow these instructions:

Mix 1/2 cup of baking soda, 1 tablespoon of liquid soap, 1/4 cup of hydrogen peroxide, and a little water in the dispenser.

Step 2. Spray the tiles with the mixture and grout and let them work for 10-15 minutes.

Step 3. If there are mildew stains, scrub those areas with a sponge or scouring pad.

Step 4. Go over the entire surface with a damp cloth to remove all traces of the mixture.

Step 5. Finally, wipe the surface dry with a cloth.


How to clean your bathroom tiles to make them shiny

How to Clean Tile Grout - Best Way to Clean Grout

If your tiles are very dirty and have lost their shine, don’t worry: there are several options to solve the problem. In all cases, always use rubber gloves for cleaning and try to keep the place well ventilated.

Apply a cleaning product directly to the surface. We recommend Better life, which provides maximum cleaning with minimum effort.

If the stains are very persistent, you can use an old toothbrush or sponge. Then rinse with a clean cloth.

If you want to disinfect, apply a product with bleach, such as Better life, directly to the part to be treated.

Let it sit according to the product’s recommendations, then scrub with a stiff bristle brush.

After cleaning, be sure to rinse your tiles thoroughly with water until all product residue is removed.

Finally, polish. A foolproof technique is to rub with a dry cloth after rinsing.


How to clean kitchen tiles

How to Clean Kitchen Tiles: Useful Tips, Methods and Step-by-Step Guide

Here is a step-by-step guide on how to clean kitchen tiles and make them as good as new:

Apply a cleaning product directly to the surface. We recommend Better life or Mr clean, which helps to remove even burnt grease.

Dry with a soft cloth. You can use Cif Ballerina Multipurpose to remove excess product and rub gently to shine.

Beware of dangerous combinations


How to remove stains from tiles?

How to clean bathroom tiles: methods and tips - Ideas by Mr Right

Baking soda is very effective for cleaning tiles and removing all kinds of dirt. Just mix two tablespoons of baking soda with water to form a paste. Then apply it to the tile and let it act for an hour. Rub with a sponge to remove the stains and remove the solution with a dry cloth. To complement the cleaning, mix ¼ cup of white vinegar and two cups of water. Pass the mixture over the tiles and let it act for 10 minutes. To finish, rinse the tiles with hot water.


Remember if you want to get your house Sparkling Cleaned without moving a finger, don’t hesitate and call Cleany! 

To purchase the best Cleaning products recommended by professionals, go to our Cleany Store!


Your email address will not be published.